The Brew Crew at Old West can put together a Keg System or Kegerator conversion that you will use and enjoy for years. We have an extensive selection of fittings which allow us to custom build a system for you.

Kegging systems are made up of three major parts which include the BEVERAGE container, the GAS side, and the DISPENSING side. The BEVERAGE container includes our rebuilt and pressure tested used pop tanks. The  pop tanks are available in 3 or 5 or gallon sizes and are of the ball lock type. If you are building a system for commercial beer your beverage container will be the keg you purchase already filled with beer.   

Next the Gas side. To carbonate and/or push your beverage through the system you will need a C02 setup. This portion includes your choice of a new aluminum 5 or 10lb  C02 tank. Aluminum tanks while more expensive provide high strength with little weight.  The tanks are shipped empty for safety reasons, and can be filled upon arrival at any fire extinguisher repair shop, or industrial gas supplier.  The GAS side also includes a new dual gauge regulator, hoses and necessary fittings for you to push, and/or carbonate your beer through the beverage tank and out the dispensing side. 

 Finally the DISPENSING side includes your choice of a hand "picnic" tap or a through the door shank and tap handle as well as needed hoses and fittings. Dispensing columns like the ones at your local "watering hole" in chrome or brass are also available. 

(Local Calls) 719-635-2443      (Fax) 719-635-7004       (Toll Free) 800-458-2739